- English







Reliability Test

Climate Environment Reliability Test Mechanical Environment Reliability Test Comprehensive Environment Reliability Test Chemical Composition Reliability Test IP Protection Level Test Physical Properties Testing Electrical Properties Reliability Test Reliability And Technical Service Large/ Heavy Sample Reliability Test

High Temperature Test Low Temperature Test Damp Heat Test Salt Spray Test Xenon Light Test Metal Halide Lamp Test Temperature Change Test Temperature/Humidity Combined Cycle Test Low Pressure Test UV Test Carbon Arc Lamp Test

Vibration Test Crash Test Drop Test Mechanical Shock Test Steady State Acceleration Test

Mold Test Gas Corrosion Test Artificial Sweat Test

Waterproof Test Dust Test Protection Against External Mechanical Impact Test
New Energy Battery Test

Renewable Energy Battery International Certification Service Battery UN38.3 Test Clean Energy Battery Inspection Report High Power Battery Testing

China Battery CQC Certification International CB Certification Of Battery UL Certification For Battery cTUVus Certification For Battery KC (Korean KC) Certification For Battery Pse (Japanese Pse) Certification For Battery India BIS Certification For Battery Taiwan BSMI Certification For Battery Russia GOST Certification For Battery Thailand TISI Certification For Battery
China Certification

CCC Certification CQC Certification China ROHS
Packaging And Transportation Test

Transportation Simulation Testing Amazon Package Testing Express Packaging Green Product Certification Packaging Materials Testing



Vibration Test

Vibration is one of the main forms of material movement, and mechanical vibration can be felt on various occasions environmental reliability test services.
The purpose of the vibration test is to simulate a series of vibration phenomena to test whether the product can withstand the test of the vibration environment during transportation or use during the life cycle.
Vibration test is divided into sinusoidal vibration and random vibration test.
Sinusoidal vibration: Periodic motion that can express its law of motion with a sine function expression.
Random vibration: A vibration whose instantaneous value cannot be predetermined at any given moment in the future.



Failure Mechanism Of Vibration Test

The failures caused by vibration are as follows:

Structural damage: This type of damage includes deformation, bending cracks, fractures, and fatigue damage of the components that make up the product.

Work performance failure: This damage generally refers to the unstable performance of the system under the influence of vibration, and some systems even fail to work, such as electrical short circuit, wire wear, abnormal electrical contact, and optical performance disorder.

Process performance destruction: This type of destruction generally refers to the loosening of product connectors, seal failure, bearing wear, solder joint desoldering, screw loosening, poor contact of printed board pins, etc.

Vibration Test Capability Of ORT

Test method: sine vibration (sweep frequency/fixed frequency), resonance search and dwell, random vibration, sine+random, random+random, sine+random+random, etc.

Rated maximum thrust: ≤18000kgf (18T)

Rated maximum displacement: ≤80mm (p-p)

Rated maximum acceleration (no load): ≤100g (980m/s²)

Applicable standards: IEC 60068-2-6, IEC 60068-2-64, GB/T 2423.10, GB/T 2423.56, GB/T 2423.35, GB/T 4857, ISTA, ASTM D4728, ASTM D4169, MIL-STD-810H , MIL-STD-883K, MIL-STD-202G, GJB 150A, GJB 1032, GJB 360B, GJB 548B, YD/T 2379, ETSI 300 019-2, GR-63, GR-487 and other standards.