- English







Reliability Test

Climate Environment Reliability Test Mechanical Environment Reliability Test Comprehensive Environment Reliability Test Chemical Composition Reliability Test IP Protection Level Test Physical Properties Testing Electrical Properties Reliability Test Reliability And Technical Service Large/ Heavy Sample Reliability Test

High Temperature Test Low Temperature Test Damp Heat Test Salt Spray Test Xenon Light Test Metal Halide Lamp Test Temperature Change Test Temperature/Humidity Combined Cycle Test Low Pressure Test UV Test Carbon Arc Lamp Test

Vibration Test Crash Test Drop Test Mechanical Shock Test Steady State Acceleration Test

Mold Test Gas Corrosion Test Artificial Sweat Test

Waterproof Test Dust Test Protection Against External Mechanical Impact Test
New Energy Battery Test

Renewable Energy Battery International Certification Service Battery UN38.3 Test Clean Energy Battery Inspection Report High Power Battery Testing

China Battery CQC Certification International CB Certification Of Battery UL Certification For Battery cTUVus Certification For Battery KC (Korean KC) Certification For Battery Pse (Japanese Pse) Certification For Battery India BIS Certification For Battery Taiwan BSMI Certification For Battery Russia GOST Certification For Battery Thailand TISI Certification For Battery
China Certification

CCC Certification CQC Certification China ROHS
Packaging And Transportation Test

Transportation Simulation Testing Amazon Package Testing Express Packaging Green Product Certification Packaging Materials Testing



Low Temperature Test

Low temperature test: The temperature during the test is not changed under a certain fixed temperature condition, depending on the actual use environment profile of the product and the purpose of the environmental reliability test services.
It can be a storage test or a work test. It can be natural or artificial environmental conditions.



Failure Mechanism Of Low Temperature Test

Test parameters	Main influence	Typical failure results
Low Temperature	Embrittlement; icing; viscosity increase and solidification; the decrease of mechanical strength; physical shrinkage.	Insulation failure, cracking, mechanical failure, increased wear of moving parts due to shrinkage or loss of lubricant performance, failure of seals and seals.

Test Capability of ORT Low Temperature Test

Min. Temperature: -70℃

Applicable standards: IEC 60068-2-1, GB/T 2423.1, MIL-STD-810H, MIL-STD-883K, MIL-STD-202G, GJB 150A, GJB 360B, GJB 548B, GB/T 28046.4, ISO 16750- 4. YD/T 2379, ETSI 300 019-2, GR-63, GR-487, etc.