- English







Reliability Test

Climate Environment Reliability Test Mechanical Environment Reliability Test Comprehensive Environment Reliability Test Chemical Composition Reliability Test IP Protection Level Test Physical Properties Testing Electrical Properties Reliability Test Reliability And Technical Service Large/ Heavy Sample Reliability Test

High Temperature Test Low Temperature Test Damp Heat Test Salt Spray Test Xenon Light Test Metal Halide Lamp Test Temperature Change Test Temperature/Humidity Combined Cycle Test Low Pressure Test UV Test Carbon Arc Lamp Test

Vibration Test Crash Test Drop Test Mechanical Shock Test Steady State Acceleration Test

Mold Test Gas Corrosion Test Artificial Sweat Test

Waterproof Test Dust Test Protection Against External Mechanical Impact Test
New Energy Battery Test

Renewable Energy Battery International Certification Service Battery UN38.3 Test Clean Energy Battery Inspection Report High Power Battery Testing

China Battery CQC Certification International CB Certification Of Battery UL Certification For Battery cTUVus Certification For Battery KC (Korean KC) Certification For Battery Pse (Japanese Pse) Certification For Battery India BIS Certification For Battery Taiwan BSMI Certification For Battery Russia GOST Certification For Battery Thailand TISI Certification For Battery
China Certification

CCC Certification CQC Certification China ROHS
Packaging And Transportation Test

Transportation Simulation Testing Amazon Package Testing Express Packaging Green Product Certification Packaging Materials Testing



Drop Ball Test Certificate

The transit drop test is mainly to assess the impact of the drop impact test stress on the product caused by the fall during the use or handling of the product, which can be a carton drop test, package drop test, drop test for plastic container and drop ball test. To get drop ball test certificate, here are some test types.
Drop Ball Test Certificate floor: steel plate, wood board, cement floor, marble floor, carpet (according to the actual situation).
Falling method:
Drop Ball Test Certificate manual handling: edge drop, corner drop, face drop.
Drop Ball Test Certificate mechanical handling: falling of rotating surface, falling of rotating angle, falling of rotating edge, etc.



Ball Drop Test Procedure

A blow shall be applied to the enclosure under package drop test to check the protection against mechanical impact.

During the drop ball drop test, the enclosure to be tested shall be mounted on a rigid support in accordance with the manufacturer's instructions for use. When a collision force with energy corresponding to the protection level of the enclosure under transit ball drop test is directly applied to the support base, if the displacement is less than or equal to 0.1mm, the support base is considered to have sufficient rigidity.

If not specified in the relevant product standard, each exposed surface shall withstand 5 collisions. The parts of the collision shall be evenly distributed on the test surface of the enclosure to be tested. No more than 3 collisions shall be applied near the same part of the enclosure. The relevant product standard shall specify the impact site where the impact force is applied.

Drop Ball Test Certificate Judgment Criteria: ort ongoing reliability test Judgment criteria for acceptance of the enclosure under transit ball drop test, such as allowable damage and evaluation criteria related to the continued safety and reliability of the equipment, Third-party testing shall be specified

Drop Ball Test Certificate Standards

Maximum drop height: 2000mm

Applicable Drop Ball Test Certificate Standard

IEC 60068-2-32, GB/T 2423.7, MIL-STD-810H, GJB 150A, GJB 1032, GJB 360B, GJB 548B, YD/T 2379, ETSI 300 019-2, GR-63, GR- 487, IEC 60068-2-32,MIL-STD-810,GJB 150,etc.